Maxon Telecom 1500 Burner User Manual


 
Low temperature burners - INDITHERM
®
www.maxoncorp.com
combustion systems for industry
MAXON reserves the right to alter specifications and data without prior notice.
© 2008 Copyright Maxon Corporation. All rights reserved.
1-2.3-8
E-m-7/08
Selection criteria
Application details
Because of the burner’s versatility there are numerous types of applications for INDITHERM
®
burners. All types of indirect-fired
applications can be equipped with this simple, industrial burner. Among the major applications there are automotive paint-bake
ovens and surface treatment, bakery ovens and dryers for the food industry.
Available INDITHERM
®
burner versions and options
INDITHERM
®
burners are designed to operate on natural gas only.
All burners are available in ANSI and ISO version. Each version will have the main gas inlet connection following either NPT or ISO
standards.
All burners include an adjustable orifice needle valve for pilot flame fine tuning, provision for UV-scanner connection and a
stainless steel combustion sleeve.
Options
Every burner has a set of options available, according to the table below:
Exception:
HTS High temperature discharge sleeve
FLR
Combustion air filter box, recommended in extremely dusty surround-
ings
DI
Direct ignited: in this case the adjustable orifice will be removed and the
pilot connection at the burner will be plugged
UVC
Burner flame scanner connection prepared for UV-scanner mounting
(scanner not included)
CBL
Connecting bracket and linkage for control motor mounting (control
motor make and type to be specified)
FR
Flame rod, only to be used in limited number of applications, see
page 1-2.3-11
The spark ignitor is standard included on the burner.