Matsui America PMD Series Dehumidifier User Manual


 
chicago headquarters
1250 West Lunt Avenue | Elk Grove Village, IL 60007 | T 847-290-9680 | F 847-290-9685
Matsui America
www.matsuiamerica.com
los angeles office
1240 North Lakeview, Suite 180 | Anaheim, CA 92807 | T 714-693-1101 | F 714-693-1345
Introducing the PMD
plasmini Dryer for micro
molding applications.
pmd series
Only from Matsui.
packed with performance
The new plasmini Dryer (PMD) is designed specifically for micro-
molding applications where molding machines use less than 5-
Lbs/Hr, making even the smallest conven-
tional dryers impractical.
The PMD incorporates Matsui's unique heat
transfer technology with air moisture purge
to effectively dry resin in small quantities.
The PMD is extremely energy efficient,
using about 50% that of a conventional hot
air dryer. Its insulated hopper hinges open
for fast, easy cleaning during material
changes.
Take a look at what the new PMD offers:
Stainless steel interior
makes cleaning and
maintenance easy
Thermal conduction
fins efficiently dry resins
specifications
available options Hopper loader, adjustable level
control switch, material recirculation,
purge air dryer
pmd model 1.5 3.0
dry temperature (˚f) 320ºF at ambient 68ºF
drying method Thermal conduction w/air purge
drying heater
(w) 270 500
power supply (volts) AC230 or 460
volume (lbs.) 3.3 6.6
hopper volume (ft3) 0.10 .21
approximate throughput (lbs/hr) 0-2 3-4
power
(a) 5
purge air volume (ft3/min) .353 - 1.765
weight (lbs) 33 44
approximate dimensions (inches) 13 x 11 x 23H 13 x 11 x 29H
mounting plate (inches) 4.3 x 4.3 with 1.2 inch throat