Master Lock 1653 Door User Manual


 
MASTER LOCK PRODUCT SPECIFICATIONS FEBRUARY 2011
Master Lock Company, 137 West Forest Hill Avenue, P.O. Box 100367, Oak Creek, Wisconsin 53154
TELEPHONE: 800-308-9244; FAX: 800-308-9245; WEBSITE: www.masterlock.com
______________________________________________________________________________
BUILT-IN COMBINATION LOCKS 10 51 61 - 4
*****Include the following paragraph if LockerManager system is being specified. *****
3. Product data for lock management system describing functions, capacities, and
requirements.
D. Provide in accordance with Section 01 78 00 - Closeout Submittals:
1. Printed control chart and text file on disc of serial numbers and lock
combinations.
***** For supervisory key access, a designated lock system with both standard locks and
ADA compliant locks will require a control key for opening any standard lock and a
master key for opening any ADA compliant lock. ADA complaint locks and standard
locks cannot use the same supervisory key.*****
*****For standard lock systems, Master Lock recommends a minimum of 2 control keys
be provided per facility. Each control key opens any standard lock in a designated lock
system. *****
2. [2] [_____] each control keys.
*****For ADA compliant locks, Master Lock recommends a minimum of 2 master keys
be provided per facility. Each master key opens any ADA compliant lock in a designated
lock system. In addition a minimum of 2 student keys should be provided for each ADA
compliant lock in a designated lock system.*****
3. [2] [_____] each master keys.
4. [2] [_____] each Student keys with removable ADA compliant keyheads for
each ADA compliant lock.
*****Include the following paragraph if LockerManager system is being specified. *****
5. Electronic copy of manual for lock management system.
PART 2 - PRODUCTS
2.1 ACCEPTABLE MANUFACTURERS
A. Master Lock Company, 137 West Forest Hill Avenue, P.O. Box 100367, Oak
Creek, Wisconsin 53154; 800-308-9244; www.masterlock.com.
B. Requests to use equivalent products of other manufacturers shall be submitted in
accordance with Section 01 25 13 - Product Substitution Procedures.