Master Lock 1651MKADA Door User Manual


 
MASTER LOCK PRODUCT SPECIFICATIONS FEBRUARY 2011
Master Lock Company, 137 West Forest Hill Avenue, P.O. Box 100367, Oak Creek, Wisconsin 53154
TELEPHONE: 800-308-9244; FAX: 800-308-9245; WEBSITE: www.masterlock.com
______________________________________________________________________________
BUILT-IN COMBINATION LOCKS 10 51 61 - 16
*****Include the following paragraph if locks are to be field installed in either existing or
new lockers. Typically most locks are installed in the field.*****
D. Field install built-in combination locks in [existing lockers.] [new lockers specified
in [Section 10 51 13 - Metal Lockers] [Section 10 51 16 - Wood Lockers]
[Section 10 51 26 - Plastic Lockers] [Section 10 51 43 - Wire Mesh Storage
Lockers] [insert section number and title].]
*****Per ADA Standards and ICC/ANSI A117.1: ADA Compliant Locks shall be located
within the allowable height and reach requirements of the ADA Standards; Chapter 3,
article 308 Reach Ranges or ICC/ANSI A117.1; Chapter 3, article 308 Reach
Ranges. *****
E. ADA compliant locks shall be installed on lockers that meet the [Department of
Justice ADA Standards for Accessible Design] [ICC/ANSI A117.1 Accessible and
Usable Buildings and Facilities] for space allowance and reach ranges for the
physically impaired.
F. After installation operate each lock to ensure proper operation. Correct
deficiencies and adjust for smooth operation. Verify combination and locker
number are as scheduled and recorded in lock management data. Verify functional
operation.
G. Demonstrate to Owner's representative:
1. Use of preset lock combinations, supervisory access, and other maintenance
activities.
*****Include the following paragraph if LockerManager system is being specified. *****
2. Locker management system: Cover data input, search, retrieve, edit,
assignment, and other system functions.
END OF SECTION