Martin Fireplaces VFCS20SNV Stove User Manual


 
58D6003 7
GETTING STARTED
MAKE SURE YOU HAVE RECEIVED ALL PARTS:
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the dealer
from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you have all parts
in good condition.
WHAT YOU WILL NEED FOR INSTALLATION:
You must have the following items available before proceeding with installation:
Gloves are recommended when handling ceramic fiber logs to prevent skin irritation
from loose fibers. Logs are fragile--handle with care.
CAUTION
Check your packing list to verify that all listed parts have been received. You should have the following:
Cast Iron Stove with Burner Assembly
Installation/Operating Instructions
Ceramic Fiber Logs
Touch-up Paint
Millivolt controlled heater designed to be operated with optional devices for ON/OFF functions.
Hand-Held Remote with Receiver, Manual or Thermostat
Wall Switch with 15' Wire
Wall T-stat with 15' Wire
Stove Mounted Thermostat Control
External regulator (for propane/L.P.G.)
or high pressure natural gas (1 to 2 PSI system)
Pipe sealant approved for use with propane/L.P.G.
(Resistant to sulfur compounds)
Piping which complies with local codes Manual shutoff valve
Sediment trap (recommended) Tee joint
Pipe wrench or appropriate wrench set Screwdrivers