Filter
Top Products
TO RESET SAFETY THERMAL LIMIT CONTROL
Your heater is equipped with a manual reset safety thermal limit control
that will automatically turn the heater off to prevent a fire if the heater over-
heats. This control is located on front of the heater just above the thermo-
stat and is marked “PUSH TO RESET”. To reset, allow the heater to cool
then simply push the red button in until it snaps. The heater should imme-
diately return to normal operation.
OPERATION OF THE SAFETY THERMAL LIMIT CONTROL INDI-
CATES THE HEATER HAS BEEN SUBJECTED TO SOME ABNORMAL
CONDITION. IT IS RECOMMENDED THAT THE HEATER BE
CHECKED BY A REPUTABLE ELECTRICIAN OR REPAIR SERVICE
TO INSURE THE HEATER HAS NOT BEN DAMAGED.
CAUTION
!
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year
from date of installation, except heating elements which are warranted against defects in workmanship and materials for five years
from date of installation. This warranty does not apply to damage from accident, misuse, or alteration; nor where the connected volt-
age is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of the prod-
uct’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping
costs incurred to return products to Marley Engineered Products Service Center.Within the limitations of this warranty, inoperative units
should be returned to the nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will
repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is
the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. AND ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID
EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED
PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT,
WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-
4328. Merchandise returned to the factory must be accompanied by a return authorization and service identification tag, both available
from Marley Engineered Products. When requesting return authorization, include all catalog numbers shown on the products.
ECR 37166
5200-2195-003 2/07
3
MODEL NO.
PH4AB D
ATE CODE
0207
PORTABLE HEATER
VOLTS AC WATTS AMPS
60 HZ HI LO HI LO
2
40 4000 2660 16.7 11.1
2
20 3360 2240 15.3 10.2
2
08 3000 2000 14.4 9.6
CAUTION: UNPLUG BEFORE SERVICING.
CAUTION: DO NOT OPERATE WITHOUT STAND.
ATTENTION: NE FAITES PAS FONCTIONNER
ATTENTION: LE RADIATEUR SANS SOCLE.
MARLEY ENGINEERED PRODUCTS
BENNETTSVILLE, SC 29512 4104-2099-002
2
F68 LISTED
M
OVABLE HEATER
NAMEPLATE
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts 1-800-642-4328
2. Purchase Replacement Parts 1-800-654-3545
3. General Product Information www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description