Makita ML902 Home Safety Product User Manual


 
ML902
Voltage Battery cartridge Operating time Charger
9.6 V
9000 Approx. 160 min.
DC9710, DC9711, DC1201,
DC1411, DC1439, DC1470,
DC1422, DC1801
9002 Approx. 230 min.
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
9033 Approx. 260 min.
DC9711, DC1411, DC1439,
DC1422, DC1801
Storing battery cartridge
Always charge the Nickel Metal Hydride battery cartridge
before storing it when you do not use it for more than six
months.
Head angle (Fig. 5)
The head angle can be adjusted in four stages.Adjust as
desired.
Replacing bulb (Fig.6&7)
CAUTION:
Thebulb isveryhot immediatelyafteroperation. Waituntil
the bulb cools off before attempting to replace it.
First, turn the ring counterclockwise and remove the
reflector. Remove the bulb holder by turning it coun-
terclockwise. Then replace the bulb.
Shoulder strap (Fig. 8)
Install the strap on the tool.
MAINTENANCE
To maintain product safety and reliability, repairs, main-
tenance or adjustment should be carried out by a Makita
Authorized Service Center.
ACCESSORIES
CAUTION:
These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments
might present a risk of injury to persons. The acces-
sories or attachments should be used only in the
proper and intended manner.
Bulb set (2 pcs)
Shoulder strap
Set plate (For Model ML903)
6