Filter
Top Products
Installing
or
removing battery cartridge
NOTE
:
Before operation, charge the battery cartridge with Makita
9.6V
Fast
charger.
To
insert the battery cartridge, pull
out the
set
plate, align the tongue
on the battery cartridge with the
groove in the flashlight handle and
slip it into place. Snap the set plate
back into place. Be sure to close the
set
plate fully before using the flash-
light.
Switch
action
To
turn the flashlight on, press the
"ON" side of the switch.
Press the
"OFF"
side to turn
it
off.
Condensina or disDersina liaht
-
--
To
cast
a
wide beam, turn the knob
so
that the pointer points to the
For
a
narrow spotlight beam, turn
the knob
so
that the pointer points
to the
=w
marking.
marking.
Stand
The stand allows the flashlight to
be positioned
at
a
convenient up-
ward angle.
2