Filter
Top Products
3.
PREPARATIONS
FOR
STARTING
1.
Connect the suction hose.
Use a reinforced-wall or wire braided hose to
prevent suction collapse. Since the pump’s
self-priming time is directly proportional
to
hose length, a short hose is recommended.
[CAUTION]-
=
Always use a strainer with the suc-
tion hose. Gravel or debris sucked
into the pump will cause serious
damage
to
the impeller and the pump
casing.
2.
Connect the discharge hose.
When using a fabric hose, always use a hose band to prevent the hose from
disconnecting under high pressure.
3.
Check the fuel level.
If level is low, fill to the shoulder of the fuel filter.
Use the mixture fuel prepared by mixing gasoline and exclusive 2-cycle oil at
a
ratio of
20-25:
1,
or the 2-cycle fuel now available on the market.
1
Oil
20
to
25
Gasoline
CAUTION}
For break-in of a new engine
Use mixture fuel of gasoline 15-20:2-cycle engine oil
1
during first
20
hours of operation.
-3-
I