Filter
Top Products
11
UVS33/36 Vent-Free Heaters
20002211
Operating Instructions
LG117
UVS33 logs
12/20/99 djt
Fig. 17 UVS33 log placement.
Top Left Log
(A20)
Rear Log
(A19)
Top Right Log
(A21)
Front Left Log
(A17)
Front Right Log
(A18)
LG117
Burner
Lava Rock
Lava Rock
Top Louvre (Grille) Removal
To remove the top
louvre (grille) as-
sembly, lift louvre
up and then out.
(Fig. 15)
Window Frame Removal
1. Shut off gas. (Refer to Lighting Instructions)
2. Let the unit cool if it has been operating.
3. Remove top louvre. (Refer to Top Louvre Removal)
4. Open the bottom louvre assembly.
5. Release the two clamps at the bottom of the window
frame by pulling down on the clamp handles.
Fig. 15 Louvre installation and
removal.
FP444
1.
2.
FP444
remove louvre
12/99
Top Louvre
(Grille) As-
sembly
Window Frame
Fig. 16 Window Frame installation and removal.
DV34-2
Glass removal
12/99
Clamps
Fireplace
Front
DV34-2
FP1000
install glass
12/99
Window
Frame
Pull
Clamp
Hook
Push
Clamp
Handle
FP1000
Window
Frame
6. Lift off the window frame as shown in Figure 15.
7. To reinstall window frame follow the above procedure
in reverse. (Fig. 16)
Log Installation UVS33
1. Remove window frame. (See "Window
Frame" section)
2. Remove logs from packaging.
As with all plastic - these
are not toys and should be
kept away from children and
infants.
3. Place rear log on rear bracket (en
-
sure log is seated properly, leveled
and centered to the unit), so it will not
move from side to side and it is firmly
positioned on the bracket.
4. Place front left log on top of burner, left
side. Use log's bottom holes to locate
it onto the left bracket log locator
studs.
5. Place front right log on top of burner,
right side. Use log's bottom holes to
locate it onto the left bracket log loca-
tor studs.
6. Place top left log onto locator notches.
Ensure log is secure.
7. Place top right log onto locator notches. Ensure log
is secure.