Filter
Top Products
20012693
5
Fig. 7 Tranquility stones’ flame appearance.
KT898
12. Reinstall the glass frame.
13. Turn the gas supply ON and light the pilot. Turn
valve to the “ON” position.
14. Reinstall valve cover.
15. Turn the electric power ON.
16. Turn fireplace on following lighting instructions in
Homeowner’s Manual. Compare flame height to
that shown in Figure 8. Check to see the flames are
not touching the stones. If the flames impinge on
the stones, turn the unit off, allow to cool and follow
Steps 1 to 3. Adjust the stones and follow Steps 12
to 14.
Tranquility Stone installation complete.