12
Majestic Fireplaces® NVB Series B-Vent
7412950
Operating Instructions
Glass Information
Only glass approved for use in Majestic
Fireplaces products may be used for
replacement.
• Glass doors are optional. The appliance may be
operated safely without glass doors.
• The use of any non-approved replacement glass will
void all product warranties.
• Bi-fold glass doors MUST BE completely open or
closed while the appliance is in operation.
• Care must be taken to avoid breakage of the glass.
• Under no circumstances should this appliance be
operated with broken glass. Replacement of the
glass as supplied by the manufacturer should be
completed by a licensed qualified service person.
• Replacement glass is available through your
Majestic Fireplaces dealer and should only be
installed by a licensed qualified service person.
Glass Cleaning
It will be necessary to clean the glass periodically.
During start-up, condensation, which is normal, forms
on the inside of the glass and causes lint, dust and
other airborne particles to cling to the glass surface.
Also, initial paint curing may deposit a slight film on the
glass. It is therefore recommended that the glass be
cleaned two or three times with a non-ammonia
household cleaner and warm water (we recommend
gas fireplace glass cleaner). After that the glass should
be cleaned two or three times during each heating
season depending on the circumstances present.
Clean glass after first two weeks of
operation.
Log Installation
1. Open glass door (if installed).
2. Remove logs from the packaging.
As with all plastic, these bags are not
toys and should always be kept away
from children and infants.
3. Place left rear log on rear log support. Ensure that
log is firmly positioned and there is no side-to-side
movement. (Figs. 15 & 16)
4. Carefully place Ember Left and Right Logs between
grate and burner. (Figs. 15 & 16)
Right Cross
Log
Left
Cross
Log
LeftRear
Log
Right Rear
Log
Embers
Ember
Right
Log
(Short)
Lava Rock
Lava Rock
Ember Left
Log (Long)
LG149
Fig. 15 NVB36 log placement.
Left Rear
Log
Left Cross
Log
Middle Cross
Log
Right Cross
Log
Right Rear
Log
Ember
Left
Log
Embers
Grate
Lava
Rock
Ember
Right
Fig. 16 NVB42 log placement.
LG148
5. Place the front of right rear log on the burner and the
back of the log on the rear log support.
6. Place the top logs onto the locator notches. Ensure
the logs are secure. (Fig. 15 & 16)