Filter
Top Products
No toxic mercury (Hg)
No toxic lead (Pb)
No toxic phosphor powders
No fragile glass
No “burn out” failure
Cold temperature compatible
10 year life (typical)
Flicker Free / Eliminates stroboscopic effect
T8 model works in T10 and T12 applications
No light wasted on reflector
Compatible with existing standard fluorescent fixtures:
Infrared remote control
Remote RF control
Color temperature adjustable (Patented)
On-board motion sensing
Energy-saving “pilot” mode
Responds to ambient light levels (daylight harvesting)
Optional adjustable end caps put light where you want it
Typical power reduction of 20% or more
No electrical work required for installation
Advantages and Features
Typical Applications
Lighting of retail space and warehouse
Mobile laboratory
Sign, channel and fixtures
Architectural lighting
Point of purchase
Rapid fluorescent to LED light conversion
Medical environments
Food Service
Hard to Reach Areas
EVER-LED
™
TUBE REPLACEMENT
™
TR
™
™
Drop-In Fluorescent Tube Replacement
Featuring LED Technology
Optional Features*
Light where you
need it
The EverLED-TR’s directed light output
increases the fixture’s efficiency
by eliminating reflector loss
EverLED-TR
Enjoying the
advantages of LED
technology is as easy
as replacing the tube in
your fluorescent light
fixture!
Color Tones
6500 K Daylight
5000 K Bright
4100 K Cool White
3500 K Neutral
2900 K Warm White (Incandescent)
-Lenses
-Reactive and electronic ballasts
-Programmed/instant/rapid/trigger start
-Eliminates need for starter can
More information available at www.EverLED.com
©
Made in U.S.A.
2007 EverLED, A Division of LEDdynamics, Inc.
44 Hull Street - Randolph, Vermont 05060-0444
PH: 802.728.4533 FAX: 802.728.3800
Please note that information
contained herein is preliminary
and subject to change.
May. 2007 - Rev 1.2
www.EverLED.com
*Available by special order