Filter
Top Products
Installation – Powering Thermostat
• Robertshaw
®
Value Series Thermostats may be powered by either
– 24V AC or 2 (AA) Batteries
• Thermostats with batteries will continue to function if 24V AC fails
• Installing Batteries
– Battery tray is a drawer in the thermostat body
– Pinch both sides and pull tray out from bottom
– Install two AA batteries
– Follow polarity as shown on inside tray
– Slide tray back into the body
• Battery Charge mode has two levels :
– Level 1: Low battery icon. Change batteries soon.
– Level 2: Low battery icon with flash. Change batteries
immediately because the system will not operate!