Filter
Top Products
KEYPAD LOCKOUT: You can lock the front panel buttons to prevent unauthorized
tampering of your thermostat settings.
NOTE: These keypad lock instructions need to be performed in a timely manner.
The 4-button sequence which locks the thermostat must be entered within a 10-
second timeframe, or the keypad lockout sequence will have to be entered again
from the beginning.
TO LOCK THE KEYPAD: Start with the System Mode switch in either the HEAT or
COOL positions, and the Set Slide switch in the RUN position. Perform a single
press of each button, in the following sequence: NEXT, NEXT, NEXT, HOLD.
TO UNLOCK THE KEYPAD: Start with the System Mode switch in either the HEAT
or COOL positions, and the Set Slide switch in the RUN position. Perform a single
press of each button, in the following sequence: NEXT, NEXT, NEXT, HOLD. The
padlock should no longer be present, with the thermostat now unlocked. If the
padlock is still on the screen, please try to enter the 4-button sequence again.
AIR FILTER MONITOR: In most systems that use a blower fan and air ducts, there
is an air filter that is either replaceable or requires cleaning. The filter is usually
located in the air handler, where the blower fan is. This thermostat feature
assists you with keeping track of proper maintenance and/or periodic
replacement intervals for your system’s filter.
The Air Filter Monitor counts the duration of filter usage that has occurred, since
the last time the Filter Monitor has been reset. This feature is for information
purposes only, and does not affect the operation of your heating or cooling
equipment, or the thermostat. When the filter usage duration has completely
expired, the word “FILTER” will flash on the screen.
TO SET THE AIR FILTER DURATION: Move the Set Slide switch to the “AIR FILTER”
position. The word “DAYS” will be shown on the screen, along with the word
“FILTER” and 2-3 characters at the top right corner of the display. Press either
of the UP/DOWN buttons to select the desired filter duration (in days) from the
following choices: OFF, 30, 60, 90, 120, 180, or 365. If the filter duration value
is set to “OFF”, then the Air Filter Monitor will be completely disabled. Return
the Set Slide switch to the RUN position when you are finished.
26