Filter
Top Products
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
FSK-ZBH_DBL_LST_EN_0820.PDF • PAGE 3
ABuilding Safety. Building Security.
Inner doors and accessories
Inner door for profi le half cylinder 30.5mm
Dimensions W × H × D 108 × 150 × 5 (mm)
Weight 500g
Order number 265752
Order name Inner Door for Profi le Half Cylinder 30.5mm ITA-2
Inner door for profi le half cylinder 35.5mm
Dimensions W × H × D 108 × 150 × 5 (mm)
Weight 500g
Order number 265748
Order name Inner Door for Profi le Half Cylinder 35.5mm ITA-3
Inner door for double-bit lock type 2/2005
Dimensions W × H × D 108 × 150 × 5 (mm)
Weight 400g
Order number 265753
Order name Inner Door for Double-bit Lock Type 2/2005 ITB-2
Inner door for double-bit lock type 70091/92
Dimensions W × H × D 108 × 150 × 5 (mm)
Weight 400g
Order number 265757
Order name Inner Door for Double-bit Lock Type 70091/92 ITF-2
Specifi cations
Depending on which lock has been determined
by the responsible fi re brigade, different inner
doors are available, which allow to accommodate
the respective locks.
The Inner Doors ITA-2 and ITA-3 are equipped
with a lock for the use of a 7-pin profi le half
cylinder.
The Inner Door ITB-2 can accommodate the
double-bit locks type 2 and type 2005.
The Inner Door ITF-2 can hold the double-bit lock
type 70091/92.
The Auxiliary Cylinder PHZ700-2 can be installed
into the fi re brigade key box instead of the profi le
half cylinder for the building key. In this case, one
or more building keys are attached by means of
a chain link.
By means of the Mounting Bracket for Profi le Half Cylin-
der PHZAW700-2, a Fire Brigade Key Box FSK700-2SX
can be easily upgraded from a two-key model to a
version for three or four building keys.