Filter
Top Products
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
BC216-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Fire Detection Control Panel
BC216-1
Description
• For application in small and
mid-sized systems
• Analogue ringbus technology with
unshielded detector cabling
• Addressable conventional technology
• Menu-driven operation
• Easy commissioning through
AUTO setup
• 32–bit multiprocessor system
• EN 54/VdS-certifi ed
Fire is a permanent threat to life and property. There-
fore, immediate response to a fi re is imperative. The
main objective of the fi re detection control panel Series
BC216 is to alarm and to react in time and, conse-
quently, save lives and protect property. For decades
LST have focused their aims to undertaking unrivaled
efforts in order to realize new innovations in the security
area. Research, development and production are loca-
ted within LST premises, thus guaranteeing fl exible and
reliable individual solutions.
Using a 32-bit multiprocessor system, the fi re detection
control panel Series BC216 ensures topmost effi ciency
and speed – prerequisites for saving lives and minimi-
zing damage to property.
The fi re detection control panel BC216-1 is designed as
a modular system. According to your system‘s concept
and size, it can be expanded individually.
The control panel provides two slots for the connection
of function modules (Conventional Detector Interface
GIF8-1 or Loop Interface LIF64-1) to which a maximum
of 16 detector lines in addressable conventional techno-
logy or a maximum of two ADM loops or a combination
of the both can be connected. In this way, you obtain
the highest degree of fl exibility for virtually any task.
The ADM loop principle offers intelligent analogue ring-
bus technology with bi-directional data transfer. Each
loop provides for the software-aided administration of
up to 198 physical address points in a maximum of 128
detector zones. Addressable conventional technology
allows for the connection of automatic and non-auto-
matic fi re detectors as well as the unambiguous iden-
tifi cation of the activated detector in the event of an
alarm.
Depending on the respective system, a Fire Brigade In-
terface FWI2-1, a Fire Brigade Interface Additional Board
FWZ2-1, an LED-Display Field LAB48 as well as further
optional componentries can be installed in addition.
Easy parameterisation on the control panel‘s display
and operating unit, via a PC keyboard, or by means of
a PC software enables you to tailor the control panel to
your individual requirements.