Filter
Top Products
----------------------------------------------------------------------------------------Section Updated: 1/10/2008 6:49 AM at http://www.lotus-europa.com ----------------------------------------------------------------------------------------
14
CLUTCH
Make and type Ferodo 200 D, diaphragm spring
Operation Cable
Driven plate diameter 7.875 in. (20 cm.)
Clutch assembly adjustment See Section 'Q' (Clutch)
Free movement at withdrawal lever .078/.125 in. (2/3 mm.)
TRANSMISSION
Type 4 forward speeds, all synchromesh and reverse
Bearings - Mainshaft Taper rollers
- Secondary gear cluster Taper rollers
Bearings adjustment See Section 'F' (Transmission)
Gear ratios - Top 1.03:1
-3rd. 1.48:1
-2nd. 2.25:1
- 1st. 3.61:1
-Reverse 3.08:1
Final drive:
Type Hypoid gear J
Bearings - Pinion Taper rollers
- Diff./crown wheel assy. Taper rollers
Bearings adjustment:
Pinion bearing pre-load See Section 'F' (Transmission)
Crown wheel/pinion backlash .005/.010 in. (.127/.254 mm.)
Number of teeth - Crown wheel 32
- Pinion 9
Final drive ratio 3.56:1
Speedometer gears: Driving Gear Driven Gear
46 F 6049, 6 teeth 46 F 6108, 12 teeth
Pink Blue
Overall ratios - Top 3.666:1
- 3rd. 5.268:1
- 2nd. 8.010:1
- 1st. 12.851:1
- Reverse 10.964:1