Filter
Top Products
Counter/Table Vertical
“Picture” Frame Tilted
MOUNTING OPTIONS
Wall Mount
(bracket included)
Stand Mount - For Flexible
Viewing Angles
Turn ON the monitor by pressing the Power ON/Off button located on the side of the monitor.
Channel Display LED Indicator:
• Select the channel you wish to watch by pressing the channel selection button on the monitor. A permanent
green light will appear in the relevant channel (1 or 2).
• Press the channel selection again to switch to the second channel.
• Press one more time for an auto switching mode. Green light will flash.
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutesunder 15 minutes under 60 minutes
Hand Tools Hardware
Router
Hi Speed
over 60 minutes
Time Tools Skills - Easy
Under 30 Minutes*
Hand Tools
Plug & Play connectors, On
screen set up
* Installation time may vary based on
application and camera cabling
7” LCD VIDEO SURVEILLANCE SYSTEM
WITH 2 DAY/NIGHT
*
INDOOR/OUTDOOR
**
CAMERAS
7” LCD MONITOR (PORTS)
Connect the phone jack end of the Audio/Video Cable to the A/V Output at the
bottom of the monitor. Connect the other end (Video - Yellow, Audio - White)
to your TV/VCR or Monitor (not included).
SHS-2S7LD SERIES
QUICK SET-UP GUIDE
STEP - 2
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorexcctv.com/support
www.lorexcctv.com
QSG_EN_R1
OPTIONAL STEP
1. Channel display LED indicator
2. Volume / brightness button control (+)
3. Volume / brightness control (-)
4. Function key (OSD for brightness, contrast control)
5. Mirror-view function
6. Power ON/OFF
7. CH Select / Auto switch
2
3
4
5
6
7
DISPLAY
1
TV / VCR / MONITOR
A/V Cable
Power
Camera 1Camera 2
A/V Output