Filter
Top Products
Why Buy A Lopi Pellet Stove?
Convenience
Lopi pellet stoves and inserts offer a clean and
environmentally sound way to heat your home.
There are no insects, dirt, pieces of bark
or slivers of wood brought into your home
with pellet fuel.
Pellets for your Lopi pellet appliance also take
up less space to store than cordwood or woodchips.
You can store four times the amount of pellet fuel in the
same space that wood takes up! A winter’s supply of
pellets for the average home occupies about 6’ x 6’
x 6’ of space so you can store them in any dry area such as a
basement, utility room or shed.
Your Lopi pellet appliance only needs to be loaded once a day.
Nothing could be easier. It will automatically feed the correct
amount of pellets to keep your home warm all day and night.
Use the wall thermostat (standard on all large models) or the
optional remote control and extend the burn time even longer.
Set the thermostat to your desired room temperature and the
pellet appliance will cycle on and off to maintain the temperature
and extend the value of your fuel.
Efficiency
Pellets are an all-natural, renewable fuel. They are held together
by lignin, which is a natural substance occurring in wood fibers
that acts as a glue when compressed. It’s so safe, it’s also used
as a binding agent in animal feed pellets.
Pellets fuel has been proven to be the cleanest burning type of
wood fuel you can use. The U.S. EPA woodburning limit of
particulates is 7.5 grams per hour - but Lopi pellet stoves only
exhaust on average 1.2 grams per hour! This is truly a fuel
source as good for the environment as it is for you.
Confidence
Your Lopi appliance is designed, engineered and built to the
highest standards in the world. We do not cut corners to save
costs, we only use the highest quality materials, heavy-duty steel
and high-tech tested components in our Lopi pellet appliances.
And we stand behind our appliances with our “REAL WORLD”
Limited Seven Year Warranty (see www.lopifire.com).
Installation Information
Insert Clearances to
Unprotected Combustibles
Freestanding Clearances to
Unprotected Combustible Walls
Minimum Clearances To Combustibles:
Pioneer Bay Yankee Bay
A - Min. 32”
(10” from hopper lid)
B - Min. 35”
(13” from hopper lid)
C - Min. 34 1/8”
(6” from hopper lid)
D - Min. 15 1/2”*
(6” from door opening)
E - Min. 34 1/8”*
(6” from door opening)
F - 9” F - 8 3/4”
(to side combustible) (to side combustible)
Fireplace Minimum Dimensions:
G - 19 5/8”
H - 30”
(includes circuit board)
I - 16 5/8”
(includes 5” for vent)
Installation:
J - The vent should be routed to the fireplace prior to installing the I
- insert. See Owner’s Manual for details on vent location.
K - The insert must protrude 9 3/8” (Pioneer Bay) 12” (Yankee Bay)
onto the hearth for the panels to fit correctly.
Surround Panels:
Pioneer Bay Yankee Bay
Rectangular Panels:
8" x 10" Panels
28 7/8"H x 40 1/2"W
10" x 13" Panels
31 7/8"H x 44 1/2"W
Mantle:
combustible
or non-combustible
B
C
G
H
I
E
D
K
J
A
A - Min. 32 3/4”
(6 1/4” from hopper lid)
B - Min. 33” to 38”
Depending on mantle depth
See Owner’s Manual for details
C - Min. 42”
(7” from hopper lid)
D - Min. 18”*
(6” from door opening)
E - Min. 36”*
(6” from door opening)
G - 20” to 25 3/4”
depending on hopper
height - See Owner’s Manual for details
H - 36”
(includes circuit board)
I - 14”
(includes 5” for vent)
Rectangular Panels:
8" x 10" Panels
32"H x 45"W
TESTING
Minimum Clearances To Combustibles:
Pioneer Yankee
Unit To Backwall A - Min. 3” A - Min. 3”
Unit To Sidewall B - Min. 9” B - Min. 9”
Front Hearth
Extension C - Min. 6” C - Min. 6”
Connector Tee
to Rear of Hearth D - Min. 2” D - Min. 2”
Corner of Unit
To Wall E - Min. 2” E - Min. 3”
Connector Tee
to Wall F - Min. 3” F - Min. 3”
Hearth Pad* G - Min. 21 5/8” Wide G - Min. 25” Wide
x 26 7/8” Deep x 29” Deep
* The pellet stove must be installed on a non-combustible floor protector
which is a minimum .018” thick - 26 gauge.
ALCOVE REQUIREMENTS
Pioneer Yankee
Minimum Height 60” 60”
Maximum Depth 48” 48”
Minimum Width 42” 43”
B
A
C
D
C
B
A
E
F
E
A
C
D
C
B
A
C
G
C
B
F
D
E
D
F
C
G
C
E
E
E
Pioneer and Pioneer Bay safety tested and certified by Warnock Hersey. Yankee and Yankee Bay safety tested and certified by Omni-Test Laboratories.
All models tested to UL 1482-94/ULC S627-93/CSA B366.2/ASTM E 1509-95.
These pellet fired appliances have been tested and listed for use in manufactured homes in accordance with Oregon Administrative Rules 814-23-900
through 814-23-909.
* The pellet insert must be installed on a non-combustible floor protector which is
a minimum .018” thick - 26 gauge.
F
Stove clearances measured from stove top. Connector clearances
measured from the flue pipe.
Yankee
Pioneer Bay
Yankee Bay
Pioneer