Filter
Top Products
OPERATING PROCEDURE
PHOTOS
4. Removing the vane motor
(1) Remove the front panel. (Refer to 1.)
(2) Remove the electrical cover. (Refer to 2.)
(3) Remove the lead wire of vane motor. (Refer to 3.)
(4) Remove the R.L. holder.
(5) Pull out the drain hose from the nozzle assembly and remove
the nozzle assembly.
(6) Remove the screws of the vane motor and disconnect the
connector.
(7) Remove the vane motor.
Photo 5
Photo 4
5. Removing the line flow fan and the indoor fan motor
(1) Remove the front panel. (Refer to 1.)
(2) Remove the electrical box. (Refer to 3.)
(3) Remove the drain hose from the nozzle assembly and
remove the nozzle assembly.
(4) Remove the water cut.
(5) Slide the hole cover and remove the hole cover.
(6) Remove the hexagon socket set screw from the line flow fan.
(7) Remove the screws fixing the motor bed and remove the fan
motor. (Be careful not to drop the fan motor because it is
heavy.)
(8) Remove the screws fixing the left side of the heat exchang-
er.
(9) Lift the left side of the heat exchanger.
(
10
) Remove the line flow fan.
Photo 8
Photo 6
Photo 7
29
Screws of the motor bed
Hole
cover
Water cut
Screws of the
vane motor
Vane motor
Vane motors
Screws
of the
vane
motor
Screws fixing
the left side
of the heat
exchanger