Logitech 700e Home Security System User Manual


 
8 English
Logitech Alert Video Security System
English 9
System Support Guide
UL Safety: Your product has been UL tested. It should only be used with other UL
listed devices.
POWER SUPPLY WARNING
Your product has a power supply. The power supply is weatherproof and can be installed outdoors.
Use these tips to ensure reliable power supply usage. Make sure the outdoor outlet is weatherproof.
Please follow these safety guidelines
To maintain proper cooling and minimize water exposure, Do NOT mount the power supply
so that it lays horizontally or flat.
Do NOT mount the power supply upside down. Keep the cable connector port on the bottom.
Avoid direct sunlight.
Caution: If left in the sunlight, surface may become hot to the touch.
Use the power supply that comes with your product; do not use any other power supply.
Do not use power supply with any other product except the Alert camera.
Do not use a damaged power supply or attempt to repair one that is damaged.
Do not immerse the power supply in water or subject it to physical abuse.
Inspect the power supply regularly for damage to its cable, plug, and body.
Do not route in an area where the plug is exposed to moisture.
Plug the power supply to the nearest power outlet.
Do not plug your Outdoor Camera into a surge protector or UPS.
Infrared Illumination LED Notes & Warnings
* Your camera contains a built-in infrared (IR) filter. In low-light conditions, the built-in IR illuminators
turn on and the filter is removed. Without the IR filter, colors have a different appearance.
Green foliage in sunlit outdoor scenes may appear grayish-green in comparison to the IR filter used
in the standard lens. During illuminated dark scenes, images will appear to be black and white.
Some materials reflect and absorb IR light differently than visible light, so some illuminated objects
may appear lighter or darker than expected.
The LEDs used in the camera are “class 1” infrared radiating devices and comply with the
International Standards EN 60825-1. Users should follow the proper use rules below. Usage other
than specified here may cause hazardous radiation exposure.
* Do not look directly into the camera for extended periods of time. Be aware that the beam is
invisible light and cannot be seen.
* Keep it out of reach of children.
* Do not try to replace or repair the camera. The LED components are not user-replaceable.
* Do not scratch the lens.
* Wipe the protective glass shield over the lens and LEDs periodically with a clean, soft cloth.
* Dispose of the camera according to the laws and regulations of your region. For example,
at a recycling center that accepts electronic devices.