Filter
Top Products
Parameter table B - Water Heater Operation
Table 1E_This table lists SMART SYSTEM control module parameters and where to access them for water heater
operation ONLY
1 Service (continued)
Menu
Sub
Item
Description
See
Page
User Access Installer Access
Display Modify Display Modify
A
1 User Code 17 Yes Yes Yes Yes
2 Date and Time 17 Yes Yes Yes Yes
3 Software Version (Software Ver) 17 Yes No Yes Yes
4 Temperature Units (Temp Units) 17 Yes Yes Yes Yes
5 DHW Night Setback Offset (DHW NSB Temp) 17 Yes Yes Yes Yes
6 DHW Night Setback Times (DHW NSB Time) 17 Yes Yes Yes Yes
B
1 Manual Reset High Limit (Man Res Hi Lim) 18 Yes Yes Yes Yes
C
1 Hours Running DHW (Hours Run DHW) 18 No No Yes Yes
2 Ignition Attempts (Ign Attempts) 18 No No Yes Yes
3 Last 10 Lockouts 18 No No Yes Yes
D
1 Clear Error Log (Clr Error Log) 18 No No Yes Yes
2 Service Mode Delay (Service Delay) 18 No No Yes Yes
3 Display Timeout (Display Time) 18 No No Yes Yes
4 Bypass Valve Time (Bypass V Time) 18 No No Yes Yes
5 Freeze Protection Pump On (Freeze Pump) 19 No No Yes Yes
6 Freeze Protection Burner On (Freeze Burn) 19 No No Yes Yes
7 Freeze Protection Differential (Freeze Differ) 19 No No Yes Yes
E
1 Tank Setpoint 19 Yes Yes Yes Yes
2 DHW Tank Offset (DHW Tank Offs) 19 No No Yes Yes
3 DHW Tank Differential (DHW Tank Diff) 19 No No Yes Yes
F
1 Anti-cycle Time (Anti Cycl Tm) 21 No No Yes Yes
2 Anti-cycle Override Differential (Override Diff) 21 No No Yes Yes
3 On/Off Delay 21 Yes Yes Yes Yes
4 Next On Delay 21 Yes Yes Yes Yes
G
1 Enable Input (Active / Inactive) 22 No No Yes Yes
2 BMS Input (Active / Inactive) 22 No No Yes Yes
3 Cascade (Active / Inactive) 22 No No Yes Yes
4 ModBus (Active / Inactive) 22 No No Yes Yes
5 ModBus Timeout (ModBus Time) 22 No No Yes Yes
H
1 Boiler Address (Blr Adress) 23 No No Yes Yes
2 Maximum Cascade Setpoint (Max Casc Stpt) 23 Yes Yes Yes Yes
GENERAL
TEMP.
SETTINGS
DATA
LOGGING
FUNCTIONS
DHW
SETTINGS
Copper-fin II/IIE Boiler and Water Heater Service Manual
15
ANTI-
CYCLING
CONTROL
MODES
CASCADE