Little Wonder Little Wonder Vacuum Cleaner User Manual


 
1. Bolt collector assembly to frame with 4 sets of bolts,
washer, and nuts.
2. Slide discharge over housing and mount flange with
2 sets of washers and nuts.
3. Assemble throttle control lever to handle with bolt,
washer and nut.
4. Attach throttle clips to cable and clip onto handle.
5. Connect Debris Bag to collector by hooking the hoop at
the top of the bag over the lip on the collector nearest the
engine. A “velcro” strip helps to hold the bag in position.
Position the buckle under the center of the handles. Pull the
strap to the left until the bag is tight and secure.
6. Fill engine oil as per the engine’s operating instruction
(provided).
7. Fill gasoline tank as per the engine’s operating instruction
(provided).
A. Use of Lifting Lug
Little Wonder High Performance Vac is supplied with
convenient Lifting Lug that can be used when you need to
move the unit. This Lug can hold weight up to a total of
250 lbs.
6.
Assembly Instructions
WARNING DANGER
NEVER RUN OR OPERATE YOUR MACHINE
UNLESS DISCHARGE BAG IS ATTACHED,
AND THE INTAKE NOZZLE IS INSTALLED.
B. Put Oil in Engine Before Starting
1. Little Wonder recommends using SAE 30 Oil. The use of
multi-viscosity oil will result in high oil consumption and
possible engine damage.
2. Add gasoline to the fuel tank, and you are ready to start.
See Engine Operating & Maintenance instructions for more
detail description of type and amount of oil and gasoline used.
WARNING DANGER
HANDLE FUEL WITH CARE. IT IS HIGHLY
FLAMMABLE. FUELING A HOT ENGINE OR NEAR
AN IGNITION SOURCE CAN CAUSE A FIRE AND
RESULT IN SERIOUS PERSONAL INJURY AND/ OR
PROPERTY DAMAGE.
WARNING DANGER
DO NOT USE OR SERVICE THE UNIT WHEN IT’S
SUSPENDED FROM THE LIFTING LUG.