Filter
Top Products
10
Operating Instructions
Setup Instructions
Quick Reference
Specications
Package Contents
Package Contents
Operating Instructions
LT-800 Operating Instructions
Press Test Tone
button here
- +
- +
Channel Select UP and DOWN buttons
- +
NOTE: The LT-800 is shipped with only limited channels (Basic Mode). To select
from all channels (Expanded Mode) refer to page 12. (for a more detailed
description of Basic and Expanded Mode refer to page 12)
1
Power Unit On
Turn power on by pressing the power button.
Select a Channel
Select the transmit channel by pressing the channel select UP and DOWN buttons. See
Channel Selection on page 14 for more information.
2
Lock on Channel
Once you determine your transmit channel, you can lock the transmitter on that channel.
To lock a channel hold the Channel Select “Up” button for 3 seconds until the padlock
icon appears on the display. To unlock, repeat this process and the padlock icon will
disappear.
3
Test Tone (if necessary)
To broadcast a test tone, press the test tone button. This helps to test receivers when no
audio source is available.
4
Lock icon