Filter
Top Products
Initiate Auto Scan Mode and Change the Scan Interval
If you want to change the can interval, use the following hot key combination:
1. Press and release the left Shift key.
2. Press and release the right Shift key.
3. Press and release the s key.
4. Press and release the “n” key, “n” being a number from 1-4. Refer to the
Scan Interval Table.
For example, to initiate Auto Scan Mode and change the scan interval to 10 sec-
onds, use this hot key combination:
7
Initiate Auto Scan Mode
The Auto Scan feature automatically cycles the KVM between both computers,
so you can monitor their activity without manually switching between comput-
ers. The factory default scan interval is three seconds.
To initiate Auto Scan Mode, press and release the left Shift key, and then press
and release the right Shift key.
To exit Auto Scan Mode, press the spacebar.
6
Integrated KVM 2-Port SwitchProConnect™ Series