Filter
Top Products
Mounting instructions (welding):
Welding diagram:
To maintain the correct angle of rotation of the head rest and the foot rest it is important that the Twist bracket is welded
according to the above instructions. Non compliance with the instructions could lead to a smaller angle of rotation or in a
worst case damage to TD1.
Dimensions drawing of the twist bracket:
LINAK part number 0701030
For the TD1 it is important that one does not weld on the outside of the Twist Bracket because there is not room for a
welding seam in the motor housing. One may weld the bracket along the whole length of its ends.