Lightolier SPS2GFSVA432 Indoor Furnishings User Manual


  Open as PDF
of 2
 
SPECPLUS SPS2GFSVA432
Page 2 of 2 2'x4' RECESSED FLUORESCENT, LENS FRAME TROFFER, STATIC, 4 LAMP, T8 OR T12
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 1A/Folio E60-34
Job Information Type:
OPTIONS & ACCESSORIES
SPECIAL LENSES: Substitute VB for VA (standard) = .125" nominal pattern 12 with 7.8 oz.
average weight per square foot. Substitute VI for VA (standard) = .125" nominal pattern 12
with 6.8 oz. average weight per square foot.
PLASTER FRAME: Catalog Number PF24 .
CONTINUOUS ROW INSTALLATION: For F type fixtures, half width flanges are required
between fixtures. Order Catalog Number: S2FCTRIM (each joint).
RADIO INTERFERENCE FILTER: 120 or 277 volt, 50 or 60 Hz. One per fixture is standard.
SUFFIX: RF.
FUSING: Internal fast-blow fusing.
SUFFIX: GLR.
Internal slow-blow fusing.
SUFFIX: GMF.
ELECTRICAL/WIRING OPTIONS: Consult factory.
DRYWALL KIT: Order Catalog Number: FK92X4.
Request Folio OA30-10.
CHICAGO PLENUM: SUFFIX: CP.
SPECIFICATIONS
PERFORMANCE: In an installation of 4 lamp 32W luminaires in a room cavity ratio of 1,
reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .85. To prevent
glare the VCP shall be not less than 43 either lengthwise or crosswise (at 100fc level) and the
average brightness at 65° shall not exceed 3108 candelas per square meter. To control veiling
reflections, luminaire output in the 30°-90° zone shall not be less than 68.6%.
SPECIFICATIONS (continued)
MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side
rails hemmed over and housing ends turned-in for safe handling.
FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester
enamel minimum 86% reflectance. Phosphate undercoating.
LENSES: VA (standard) extruded virgin acrylic, 3/16" square based female cones, running
45° to the panel edge, .095" nominal thickness (similar to pattern 12). VB (optional) .125"
nominal pattern 12 with 7.8 oz. average weight per square foot. VI (optional) .125" nominal
pattern 12 with 6.8 oz. average weight per square foot.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is
within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and ULc Listed.
PHOTOMETRY MODEL NO. SPS2GFSVA432
coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)
RF 20 20 20
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
1898582 807876 777573
2827570 716764 686562
3756761 635854 615753
4696053 575147 555046
5645447 514541 504441
6594942 464136 454036
7554437 423632 413632
8514034 393329 383329
9483731 363026 353026
10 45 34 28 33 28 24 32 27 24
visual comfort probability (rated lumens per lamp 3150.)
room size ceiling height ceiling height
W L 8.5 10.0 13.0 16.0 8.5 10.0 13.0 16.0
20 20 57 62 69 77 57 60 67 75
20 30 49 54 59 66 52 54 58 64
20 40 45 49 54 59 49 51 54 57
20 60 41 45 49 54 46 49 51 54
30 20 59 63 68 75 59 62 66 73
30 30 50 54 58 64 53 55 57 62
30 40 45 49 52 56 49 51 53 55
30 60 41 44 47 51 46 48 49 52
30 60 39 42 43 47 44 46 47 50
40 20 61 65 69 74 61 64 68 73
40 30 52 56 59 64 54 57 59 62
40 40 47 50 53 56 50 52 54 56
40 60 42 45 47 50 46 49 49 51
40 80 39 42 43 46 44 47 47 49
40 100 38 40 41 44 43 45 46 47
60 30 54 58 60 64 55 58 59 63
60 40 48 51 53 57 51 53 54 56
60 60 43 45 47 50 47 49 49 51
60 80 40 42 43 46 44 46 47 49
60 100 38 40 40 43 43 45 45 47
100 40 51 54 56 59 53 55 56 59
100 60 46 48 49 53 49 51 51 53
100 80 42 44 44 48 46 48 48 50
100 100 40 42 42 44 44 46 46 47
room cavity ratio
luminaries lengthwise
luminaries crosswise
ORDERING INFORMATION
Explanation of Catalog Number. Example: SPS2GFSVA432120O4RF
SP
SPECPLUS:
Recessed
fluorescent
troffer
S
STATIC
2
FIXTURE
WIDTH
CEILING TYPE:
G= Grid (lay-in T bar)
F=Flanged (overlap) Z spline
and plaster frame
LENS FRAME:
FS= Flat steel frame
RA=Regressed
aluminum frame
FA=Flat aluminum
frame
VA
LENS/SHIELDING TYPE:
VA (virgin acrylic)
standard (see options and
consult factory)
4
LAMP
QUANTITY
LAMP/
FIXTURE LENGTH:
32=T8
34=T12
(Nominal 48")
VOLTAGE:
120 or 277
BALLAST TYPE:
2-2 Lamp Mag. T12 LE
<20THD <10THD
2-2 Lamp Elec. T8 SO* H
I*
1-4 Lamp Elec. T8 O4* H4*
LOL T8 Dimming PS
*Instant Start Standard
OPTIONS:
Add appropriate suf-
fix to catalog no., ie:
(GLR)
Other dimming options. Consult factory.
Luminaire Efficacy Rating
LER-73.2 Watts-108.7 BF-0.86
 previous