Lightolier SPS2GFSVA332 Indoor Furnishings User Manual


  Open as PDF
of 2
 
SPECPLUS SPS2GFSVA332
Page 2 of 2 2'x4' RECESSED FLUORESCENT, LENS FRAME TROFFER, STATIC, 3 LAMP, T8 OR T12
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 1A/Folio E60-32
Job Information Type:
OPTIONS & ACCESSORIES
SPECIAL LENSES: Substitute VB for VA (standard) = .125" nominal pattern 12 with 7.8 oz.
average weight per square foot. Substitute VI for VA (standard) = .125" nominal pattern 12
with 6.8 oz. average weight per square foot.
PLASTER FRAME: Catalog Number PF24 .
CONTINUOUS ROW INSTALLATION: For F type fixtures, half width flanges are required
between fixtures. Order Catalog Number: S2FCTRIM (each joint).
RADIO INTERFERENCE FILTER 120 or 277 volt, 50 or 60 Hz. One per fixture is standard.
SUFFIX: RF.
FUSING: Internal fast-blow fusing.
SUFFIX: GLR.
Internal slow-blow fusing.
SUFFIX: GMF.
ELECTRICAL/WIRING OPTIONS: Consult factory.
DRYWALL KIT: Order Catalog Number: FK92X4.
Request Folio OA30-10.
CHICAGO PLENUM: SUFFIX: CP.
SPECIFICATIONS
PERFORMANCE: In an installation of 3 lamp 32W luminaires in a room cavity ratio of 1,
reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .84. To prevent
glare the VCP shall be not less than 50 either lengthwise or crosswise (at 100fc level), and the
average brightness at 65° shall not exceed 2299 candelas per square meter. To control veiling
reflections, luminaire output in the 30°-90° zone shall not be less than 68.8%.
SPECIFICATIONS (continued)
MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side
rails hemmed over and housing ends turned-in for safe handling.
FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester
enamel minimum 86% reflectance. Phosphate undercoating.
LENSES: VA (standard) extruded virgin acrylic, 3/16" square based female cones, running
45° to the panel edge, .095" nominal thickness (similar to pattern 12). VB (optional) .125"
nominal pattern 12 with 7.8 oz. average weight per square foot. VI (optional) .125" nominal
pattern 12 with 6.8 oz. average weight per square foot.
ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is
within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and ULc Listed.
PHOTOMETRY MODEL NO. SPS2GFSVA332
coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)
RF 20 20 20
RC 80 50 30
RW 70 50 30 50 30 10 50 30 10
1888481 797775 767472
2817469 706663 676461
3746660 625854 605653
4685952 565046 544946
5635346 504540 494440
6584841 464036 443935
7544437 423632 413531
8504033 383328 373228
9473730 353026 342926
10 44 34 28 33 27 23 32 27 23
visual comfort probability (rated lumens per lamp 3150.)
room size ceiling height ceiling height
W L 8.5 10.0 13.0 16.0 8.5 10.0 13.0 16.0
20 20 64 68 75 82 64 67 73 80
20 30 57 61 67 63 59 62 65 70
20 40 53 57 62 67 57 59 61 65
20 60 49 53 57 62 54 56 58 61
30 20 66 70 75 81 66 69 73 79
30 30 58 62 66 71 60 62 65 69
30 40 53 56 60 64 57 59 60 63
30 60 49 52 55 59 54 56 57 59
30 80 47 50 51 55 52 54 55 57
40 20 68 71 76 80 67 70 74 79
40 30 60 63 67 71 61 64 66 69
40 40 54 57 60 64 58 60 61 63
40 60 50 53 55 58 54 56 57 59
40 80 47 50 51 54 52 54 55 56
40 100 46 48 49 52 51 53 53 55
60 30 61 65 67 71 62 65 66 70
60 40 56 59 61 64 58 60 61 64
60 60 50 53 55 58 54 56 57 59
60 80 47 50 50 54 52 54 54 56
60 100 46 48 48 51 51 52 52 54
100 40 59 62 64 67 60 62 63 66
100 60 53 56 57 60 56 58 58 61
100 80 50 52 52 55 54 55 55 57
100 100 48 49 49 52 52 53 53 54
room cavity ratio
luminaries lengthwise
luminaries crosswise
ORDERING INFORMATION
Explanation of Catalog Number. Example: SPS2GFSVA332120O3RF
SP
SPECPLUS:
Recessed
fluorescent
troffer
S
STATIC
2
FIXTURE
WIDTH
CEILING TYPE:
G=Grid (lay-in T bar)
F=Flanged (overlap) Z spline
and plaster frame
LENS FRAME:
FS=Flat steel frame
RA=Regressed
aluminum frame
FA=Flat aluminum
frame
VA
LENS/SHIELDING TYPE:
VA (virgin acrylic)
standard (see options and
consult factory)
3
LAMP
QUANTITY
LAMP/
FIXTURE LENGTH:
32=T8
34=T12
(Nominal 48")
VOLTAGE:
120 or 277
BALLAST TYPE:
1 & 2 Lamp Mag. T12 LE
<20THD <10THD
1 & 2 Lamp Elec. T8 SO* H
I*
1-3 Lamp Elec. T8 O3* H3*
LOL T8 Dimming PS –
*Instant Start Standard
OPTIONS:
Add appropriate suf-
fix to catalog no., ie:
(GLR)
Other dimming options. Consult factory.
Luminaire Efficacy Rating
LER-70.6 Watts-84.4 BF-0.87
 previous