Filter
Top Products
Washer
Nut
Step 3
Attach both the washers
and nuts to the two
Threaded Studs.
TO LEVEL FIXTURE, loosen Knurled Screw,
adjust to required position, tighten Knurled
Screw to secure.
6
5
Canopy
Press
Here
Stainless
Steel
Cable
Spring-
loaded
Glider
Fixture
Detail A
Cut-off
Excess
Cable
Knurled
Screw
Spring-loaded
Glider
Cable
Fixture
HANGER ASSEMBLY FOR CONTINUOUS ROW
7
Cable
Toggle
for
Fixture B
Step 1
With Fixture suspended
by the Cable at the
opposite end, attach one
end of the Cable with
Toggle into Fixture A.
A
Cable
Threaded
Studs (2)
B
A
Threaded
Studs (2)
Step 2
Install the next Fixture
and attach the Cable End
into Fixture B.
ASSEMBLE HANGER SET FOR BEGINNING OR
CONTINUOUS ROW as shown. To acquire the sus-
pension length, press down on the Spring-
loaded Glider and
release when
proper length is
set. See Detail "A".