Lightolier IS:FACSA36 Indoor Furnishings User Manual


  Open as PDF
of 2
 
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE
This fixture is intended for installation in accordance with the National Electrical Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
LIGHTOLIER a GENLYTE company.
631 Airport Road, Fall River, MA 02720
®
INSTRUCTION SHEET NO.
IS:FACSA36
0697 Page 2 of 2
B. TO ATTACH FIXTURE TO STEM
1. Attach (2) SPRING CLIPS to FIXTURE HOUSING by sliding
SPRING CLIPS onto (2) raised pockets on top of FIXTURE
HOUSING. (Fig. 5)
2. Make electrical connections: connect STEM KIT FIXTURE
GROUND to HOUSING FIXTURE GROUND. STEM KIT
FIXTURE WHITE LEAD to HOUSING FIXTURE WHITE LEAD.
STEM KIT FIXTURE BLACK LEAD to HOUSING FIXTURE
BLACK LEAD. Use WIRE NUTS (provided).
3. Align (2) holes in COVER with (2) SPRING CLIPS secured
on top of FIXTURE HOUSING. (Fig. 6) Assemble FIXTURE
HOUSING to STEM KIT using (2) SCREWS (provided).
SPRING CLIP
RAISED POCK-
SCREWS
(2) PROVIDED
COVER
WIRE NUT
(3) PROVIDED
SPRING
CLIPS
(PROVIDED)
FIXTURE
HOUSING
Fig. 5
Fig. 6
 previous