Filter
Top Products
Architectural Decorative IS-CWL280612
Page 3 of 3 Instruction Sheet for Assembly and Installation
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A1008
��0º
�0º
��0º
�80º
Turn the power ON
Rotate each luminaire to aim the 110° beam
B Do not attempt to install or use a luminaire until you read and understand the
installation instructions and safety labels.
B Do not use a luminaire if the lens, housing, or power cables are damaged.
B Luminaire have line voltage risk of shock and no user serviceable parts. Do
not attempt to open them.
B Do not use a luminaire for any voltage for which it is not rated. Do not
exceed the specified voltage and current input for any luminaire.
B Ensure that main power supply is off before installing or wiring a luminaire.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1) This device may not cause harmful interference. 2)
This device must accept any interference received, including interference that
may cause undesired operation.
C Do not hot swap luminaire. Ensure that power to the series is off before
connecting or disconnecting individual luminaires.
C Caution: Led Radiation Do Not Stare Into Beam Class 2 Led Product
Item Type Part Number
Concealed White LED Adjustable, 12 inch (305 mm), 120 VAC
2800 K CWL281212
4200 K CWL421212
Concealed White LED Adjustable, 6 inch (152 mm), 120 VAC
2800 K CWL280612
4200 K CWL420612
Mounting Track
25 @ 4 ft (1219 mm) CLMT2548
Leader Cable, Permanent
10 ft (3.05 m) CWLPC120
Jumper Cable
1 ft (305 mm) CWLJC12
5 ft (1.5 m) CWLJC60