Filter
Top Products
Guardsman Vandal Resistant GSW SERIES
Page 1 of 2 Ceiling or Wall Mounted Fluorescent
6" Width, 3-7/8" Deep, 24" or 48" Nominal Length, 1 or 2 Lamp T8
Features
• Excellent for locations where vandal resistance is required, areas
such as hallways, stairwells, locker rooms, parking garages and
psychiatric hospitals.
• For ceiling or wall mounted applications.
• Can be vertically or horizontally mounted on wall.
• 20 gauge cold rolled steel, post painted, baked white enamel
housing.
• 18 gauge cold rolled steel post painted baked white enamel end
caps, standard.
• Linear prismatic lens 50% DR (impact resistant) and 50% standard
acrylic with nominal thickness of 1/8", withstands 70 ft lbs impact
without breaking.
• Tamper resistant holt head screws secure ends to housing.
• Only 3-7/8" deep, meets American with Disabilities Act for wall
mounted fixtures.
• Nominal 2' and 4' lengths.
• 73.9% efficient (T8 lamps).
Dimensions
Job Information Type:
Job Name:
Cat.No.:
Lamp(s):
V olts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Copyright 2003 Lightolier Section 6A/Folio P10-62
9/03
4"
(102mm)
6"
(152mm)
4"
(102mm)
6"
(152mm)
24"
(610mm)
48"
(1219mm)
23-15/16"
(608mm)
3-7/8"
(98mm)
6"
(152mm)
End Cap
End Cap
Nut
Nut
Nut
Threaded
Nipple
For Continuous Row Mounting
7/8" dia. K.O. (2)
9/32" hole (2)
7/8" dia. K.O. (3)
9/32" hole (2)
1-7/8" dia. K.O.
Required to
space fixtures
apart so ends
can be
removed or
installed.