Filter
Top Products
*Contact factory for availability of louver finishes.
VP PARABOLIC DVA5G32MS240
Page 2 of 2 20”x 60” RECESSED FLUORESCENT 32 CELL PARABOLIC LOUVER
STATIC AND AIR SUPPLY/ RETURN IES RP24 PREFERRED
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 2/Folio G09-15
Job Information Type:
SPECIFICATIONS
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1 reflectance 80% ceiling, 50% wall, 20% floor the C.U. shall not be
less than 0.69. To prevent glare the VCP shall not be less than 88 either length-
wise or crosswise (at 100 fc level) and that the average luminance will conform
with the IES RP-24 preferred standard, and have a fixture efficiency of not less
than 60%.
MATERIALS: Chassis parts are die-formed 22 gauge cold rolled steel. Faceplate
is die-formed 20 gauge cold rolled steel with edges hemmed for rigidity.
LOUVER: Post-anodized aluminum.
FINISH: Louver - Low iridescence specular post-anodized vertical grain sheet or
Low iridescence reflector matte post-anodized vertical grain sheet. Chassis exte-
rior -white baked polyester powder coat.
SPECIFICATIONS
(continued)
ELECTRICAL: Rapid start HPF thermally protected class “P” ballast CBM certi-
fied by ETL if K.O. is within 3” of ballast use wire suitable for at least 90°.
LABELS: Listed by CSA/UL.
ORDERING INFORMATION Explanation of Catalog Number. Example: DVA4G32MS240120OC
DV
ADVANCE TECH-
NOLOGY:
Reflector Louver in
a 20 x 60 Faceplate
BODY STYLE:
A=Air Handling/
Static
5
FIXTURE
WIDTH
5 = 20”
G
CEILING TYPE:
G-Grid
(Lay in T-Bar)
32
NUMBER OF
CELLS:
LOUVER
FINISH:
MS=Low Iridescence
Reflector Matte
PS=Low Iridescence
GFI Anodized
Specular
2
LAMP QUANTITY
40
LAMP
LENGTH:
40 = 48”
VOLTAGE:
120
277
347
OPTIONS:
Add appropriate
suffix to catalog
no, ie: (HRD)
BALLAST TYPE:
OC = T8
SO = Electronic T8
DI = Dimming