Filter
Top Products
INSTRUCTIONS FOR LAMPING
1. Check to see that power is OFF before Iamping or
relamping.
2. Remove APERTURE BAFFLE from HOUSING by
pulling straight out as shown in Fig. 2.
3. Assemble LAMP to APERTURE BAFFLE as shown
in Fig. 3 making certain GLASS LAMP GUARD is
sandwiched between LAMP and APERTURE
BAFFLE, and firmly held in placce by LAMP
SPRINGS. CAUTION: Do not touch lamp capsule
with bare fingers.
4. Connect SOCKET to LAMP by inserting pins on
LAMP into holes in SOCKET (Fig. 3).
Replace APERTURE BAFFLE back into HOUSING
by
pushing straight in.
WARNING: LAMP MANUFACTURERS
REQUIRE THE GLASS LAMP GUARD BE IN
PLACE BEFORE ENERGIZING LAM~ AND
THAT GREAT CARE SHOULD BE TAKEN
THAT LAMP IS FULLYCOOLED BEFORE
RELAMPING. COLOR FILTERCAN BE
USED
IN PLACE OF GLASS GUARD.
1
NOTE: LOW VOLTAGE FIXTURES should be
dimmed only with special dimmers intended
specifically for that purpose. Use Lightolier
Lytemode, Scenist, Crescendo VA, Neptune VA,
Precision VAI, Easyset VA, Sunrise VA, Radiant
VA or equivalent products by others or variable
auto-transformers or electronic dimmers
intended for use with low voltage fixtures.
NOTE: Lamp wattage 50W max.
1S:8672
0989
Page 2 of 2
I
n
H
HOUSING
APERTURE BAFFLE
FIG. 2
SOCKET
d
GLASS LAMP
Ell ADi_I
T
IT CLAMP
““”, ,”
LAMP SPRING
-
APFRTIJRE
1= BAFFLE
,. !-,,,”
FIG. 3