Filter
Top Products
Instruction Sheet Number 1104FESR
Page 2 of 2 Installation Procedure for Convertible IC/Non IC
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • B1005
6. Snap-On (Fig. E)
Important - Insert SOCKET ASSEMBLY in
neck of REFLECTOR making sure spring tabs
fully engage into SLOTS in REFLECTOR.
7. Push-Up (Fig. F)
Push REFLECTOR TRIM straight up until
it is tight against ceiling.
8. To remove trim (Fig. G):
• Turn off power to fixture.
• Remove lamp.
• Squeeze REFLECTOR SPRING from inside until the TRIM disengages.
• To retrieve SOCKET ASSEMBLY, pull on one of the SOCKET SPRING LEGS
to disengage.
9. Ballast Replacement (Fig. H
NOTE: Ballast replacement must be performed by a “qualified electrician.”
1. Turn power OFF.
2. DO NOT CUT WIRES. Release all wires from BALLAST WIRE
CONNECTORS by inserting small blade tool with insulated handle into
WIRE RELEASE SLOTS.
NOTE: Ballast Kits generally are supplied with this special wire release tool.
TRIM
SOCKET CUP
SOCKET SPRING
REFLECTOR
SPRING
U.S. and Foreign patents pending
See Separate
Reflector Trim
Instruction Sheets
}
TWO (2) YEAR LIMITED WARRANTY Exclusively For Energy Star
®
‚ Qualified Luminaires: Lightolier
warrants to you, the original purchaser, for a period of two years from the date of original retail
purchase, this product to be free from defects in materials and workmanship, when properly installed
and under normal conditions of use. Lightolier, at its sole option, will repair or replace, free of charge,
any Lightolier product found defective in workmanship or materials. The purchaser is responsible
for any costs associate with removal and re-installation of the product and shipping to and from the
manufacturer.
For warranty claims on defective ballasts within the said two-year period, Lightolier will provide a
replacement ballast of identical type and function (but not necessarily brand name) free of charge.
Lightolier is not responsible for any costs incurred to physically replace the ballast in the light fixture.
Ballast manufacturer's warranties may extend beyond a two-year time period. For defective ballast
claims outside the Lightolier warranty period, please contact the ballast manufacturer per the informa-
tion noted on the ballast label.
THE MANUFACTURER LIMITS THE DURATION OF THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE PRODUCT TO THE LIMITED
WARRANTY PERIOD SET FORTH ABOVE, AND OTHERWISE DISCLAIMS ALL IMPLIED WARRANTIES
WITH RESPECT TO THE PRODUCT AND ITS PARTS. Some states disallow certain limitations on implied
warranties, so you should consult your state law if you have a question regarding this Limitation and
disclaimer. The manufacturer disclaims any and all liability for incidental, consequential, special or
indirect damage arising out of any claimed breach of warranty or otherwise. However, some states do
not allow exclusion or limitation of such damages, so this disclaimer may not apply to you. The remedy
provided in this Limited Warranty for defective products is the purchaser's sole and exclusive remedy,
subject to your state law. Further, this Warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state.
No agent, employee or representative of Lightolier has any authority
to bind Lightolier to any affirmation, representation or warranty concerning
goods sold by Lightolier except as specifically included herein.
For all warranty claims, please call Lightolier at (866) 660-5483.
PROVIDE THIS WARRANTY TO THE END USER.
END USER SHOULD RETAIN THIS DOCUMENT FOR WARRANTY RECORDS.
J-BOX MOUNTING STRAP
RETAINING CLIP
REMOV
E
INSERT
BALLAST WIRE
CONNECTORS
WIRE RELEASE
BLADE
(BY OTHERS)
WIRE RELEASE
SLOTS
LAMP
RED
BLUE
RED
BLUE
BALLAST
NUETRAL
(WHITE)
HOT
(BLACK)
GROUND
Fig. H
Ballast
Replacement