LG Electronics M8004RY4 Air Conditioner User Manual


 
10 Room Air Conditioner
Installation
BEFORE INSTALLATION
1. Insert the guide panels into the guides of the air conditioner.
Fasten the curtains to the unit with screws (TYPE A) as
shown Figure. 5.
2.
Cut the adhesive-backed seal strip (TYPE D) to the window
width.
Remove the backing from the seal strip and attach the seal
strip to the underside of the bottom window. (
Figure
. 6)
NOW START INSTALLATION
1. LOCATING UNIT IN WINDOW
Open the window and mark center line on the center of the
inner sill, as shown in Figure. 6.
2. ATTACH L BRACKET
a. Install the L brackets behind the inner window sill, with
the short side of bracket as shown.
Use the 2 screws (TYPE A) provided.
b. The bracket helps to hold unit securely in place. Be sure
to place bracket edge flush against back of inner sill. See
Figure. 7.
CAUTION:
During the following step, hold
unit firmly until window sash is lowered to top
channel behind side panel frames. Personal injury or
property damage may result if unit falls from window.
3. INSTALL THE AIR CONDITIONER IN THE WINDOW
a. Carefully lift the air conditioner and slide it into the open
window. Make sure the bottom guide of the air condition-
er drops into the notches of the
L bracket. See Figure. 8.
IMPORTANT :
When the air conditioner drops into the L bracket, the air con-
ditioner will be centered in window opening as shown in
Figure. 9.
b. While steadying the air conditioner, carefully bring the
window sash down behind the upper guide of the air con-
ditioner, as shown in Figure. 10.
ROOM SIDE
CENTER LINE
INNER SILL
SEAL STRIP
(TYPE D)
OUTSIDE
INSIDE
L
BRACKET
OUTER SILL
SHORT SIDE
INNER SILL
TYPE A
8"
8"
CENTER LINE
SEAL
WINDOW FRAME
BOTTOM
GUIDE
ABOUT
1/4"
L
BRACKET
UPPER GUIDE
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Type A
Type A
Center Line
F
TEMP
F1 LOW
F2 MED
F3 HIGH
Dry Timer
Fan
Energy
Saver
Cool