Filter
Top Products
14
Features and Installation
Remove the backing from vertical and
horizontal insulation and attach them to
the inside of the wall sleeve as shown
below.
Remove the backing from the support
blocks and attach them to the inside of
the wall sleeve as shown below. Slide
the baffles in the slots of the support
blocks.
Remove the backing from vertical
insulation and attach them to the back
of the unit as shown below.
6. Install the new unit into the wall sleeve.
7. Insert front insulation between the wall
sleeve and the unit. A flat-bladed
screwdriver or putty knife is
recommended.
8. To assemble trim, insert the snaps into
the slots of others.
To install trim to the sleeve, slide the
trim through the unit until it is flush
with the wall sleeve.
Wall
Trim (2 ea)
Wall
Wall Sleeve
Vertical
Insulation
Front
A
B
Wall
Wall
Sleeve
Insulation
Horizontal
A+
1
/4"
(6 mm)
B+
1
/4"
(6 mm)
Insulation
Vertical
Front