Select dry mode for dry operation.
Drydry model is used to remove humidity from the room without additional cooling.
Once the set temperature is reachedthe compressor and circulation fan turns off.
Fan speed is pre-set and cannot be adjusted.
TEMPERATURE CONTROL
The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 60
The unit takes an average of 30 minutes to adjust the room temperature by 1 F.
F~86 F(16 C~30 C).
REMOTE CONTROL SENSOR
CAUTION
The Remote Controller will not function properly if strong light strikes the sensor window
of the air conditioner or if there are obstacles between the Remote Controller and the air
conditioner.
1.Remote the cover from the back
of the remote controller.
2.Insert one battery.
Be sure of the polarity when
installing the battery.
Be sure that the battery is new.
3.Re-attach the cover.
Do not use rechargeable
battery .Such battery
differ from standard dry
cell in shapedimensions
and performance.
Remove the battery from
the remote controller if the
air cnditioner is not going
to be used for anextened
length of time.
How to Insert Battery(AAA Size)