Filter
Top Products
26
PREFERRED METHOD
Ensure proper ground
exists before use
Fig. 24
3-prong
grounding
plug
Ground
prong
Power
supply
cord
3-prong
grounding
type wall
receptacle
Electrical Safety ( L1804R, LW1800ER MODELS)
IMPORTANT
(PLEASE READ CAREFULLY)
FOR THE USER'S PERSONAL SAFETY, THIS
APPLIANCE MUST BE PROPERLY GROUNDED
The power cord of this appliance is equipped with a
three-prong (grounding) plug. Use this with a standard
three-slot (grounding) wall power outlet (Fig. 24) to
minimize the hazard of electric shock. The customer
should have the wall receptacle and circuit checked by
a qualified electrician to make sure the receptacle is
properly grounded.
DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
FUSE – Use a time-delay fuse or circuit breaker. Refer
to serial plate for proper power supply
requirements.
230, 208, and 230/208 VOLT UNITS
These units are equipped with a three-prong grounding
plug on the power supply cord, which must be plugged
into a matching properly grounded three-prong wall
receptacle for your protection against possible shock
hazard. If such an outlet is not present, one must be
installed by a qualified electrician in accordance with
the National Electrical Code and local codes and
ordinances.
: DO NOT USE AN EXTENSION CORD
on 230, 208, and 230/208 Volt units.
NOTICE