LG Electronics LB1000ER Air Conditioner User Manual


 
CABINET
DRAIN
PAN
DRAIN HOSE
SCREW
12
After removing the Air Purifying Filter, pull
slightly forward to remove the Air Purifying filter.
Soak the Air Purifying Filter in water mixed with a
mild detergent for 20~30 minutes.
Dry the Air Purifying Filter in the shade for a
day.(The moisture must be removed completely
on this part.)
Note the cuts of electric discharge lines.
Re-install the Air Purifying Filter to the original
position.
Take the drain pan which is located in the air
discharge.
Remove the hole rubber from the base-pan (for
some models).
Install the drain pan to the right corner of the
cabinet with 4 (or 2) screws.
Connect the drain hose of 3/5" inside diameter to
the outlet located at the bottom of the drain
pan.You can purchase the drain hose or tubing
locally to satisfy your particular needs. (Drain
hose is not supplied).
4
3
2
1
5
4
3
2
1
The Air Purifying filter behind the air filter should be checked and cleaned once every 3 months or more often if
necessary.
Remote Control Operations
Air Purifying Filter (Optional)
The air conditioner employs a proper drain method whereby the condensed water (moisture removed from the
air) is drained to the outside.
In very humid weather, (and for reverse cycle models in the reverse mode) excessive condensate water removed
from the air may cause some water to collect. To remove this excess water you can install the drain pan as
detailed below.
Remote Control Operations
How to Attach Drain Pan (Optional)
WARNING: Don't touch this Air Purifying Filter within 10
seconds after opening the inlet grille;
it may cause an electric shock.least 3 minutes before resetting
to the cooling operation again.