Filter
Top Products
OSD Icon on Main Menu Submenu Description
Options Menu Position Menu position adjusts menu location on
the screen.
Default Default returns the menu position to the
default settings.
Custom Horizontal: Changes the horizontal
position of the OSD.
Vertical: Changes the vertical
position of the OSD.
Save
Factory Reset Cancel
Reset
Resets monitor to the original factory
settings.
Accessibility Controls button and menu settings for
accessibility preferences.
Button repeat rate:
Select to change.
Off
Default
Slow
Menu time out: Sets the length of
time the OSD will remain active
after the last time a button is
pressed.
Exit Exit Exit the main menu
or
·
·
·
·
·
·
·
·
Table 2-2. OSD functions (continued)
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need
to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1280 x 1024 at 60 Hz, which is the Native Resolution
Display mode.
2-5 L191 Flat Panel Monitor User’s Guide