![](http://pdfasset.owneriq.net/b/96/b96aa539-479e-469e-b57e-b85aa468b353/b96aa539-479e-469e-b57e-b85aa468b353-bg11.png)
17
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
5. Screw in the four tap tights, included with this kit, using a 5/32 allen
wrench.
6. Replace the Burn-Pot and check that it is firmly in place (if you can
rotate the Burn-Pot it is not installed correctly). If present, install
the optional log set according to the log set installation instructions
(included with your log set).
7. Re-hang the door by reversing the instructions in step 1.
Figure 37