Lennox Hearth LMDTV-3328CNM Indoor Fireplace User Manual


 
16
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
3 Piece Trim Kit
Cat. No. Model No. Description
H0453 TK33PB3
33” Polished Brass,
LMDVT-3328, LMDVR-3328
96K21 TK35PB3
35” Polished Brass,
LMDV-3530
96K22 TK40PB3
40" Polished Brass,
LMDV-4035
H1813 TK33BS3
33” Brushed Stainless,
LMDVT-3328, LMDVR-3328
H1815 TK35BS3
35” Brushed Stainless,
LMDV-3530
H1816
TK40BS3
40", Brushed Stainless,
LMDV-4035
H4820 TK33C3
33” Charcoal,
LMDVT-3328, LMDVR-3328
H4821 TK35C3
35” Charcoal,
LMDV-3530
H4823 TK40C3
40" Charcoal,
LMDV-4035
(ref. Form # 750,147M)
4 Piece Trim Kit
Cat. No. Model No. Description
96K17 TK35PB4
35” 4 Piece Finish Trim Kit,
Polished Brass, LMDV-3530
96K18 TK40PB4
40” 4 Piece Finish Trim Kit,
Polished Brass, LMDV-4035
(ref. Form # ii-9299)
Forced Air Kit
The FBK-100 blower provides constant velocity forced
air circulation. The FBK-200 assembly with variable
speed, wall-mountable switch provides variable speed
forced air circulation. The FBK-250 assembly with
variable speed unit-mountable switch, also provides
variable speed forced air circulation.
Forced Air Blower Kits
Cat.
No.
Model No. Description
80L84 FBK-100 Blower, Standard
(single speed)
80L85 FBK-200 Blower, Variable Speed
(w/wall-mounted switch)
80L86 FBK-250 Blower, Variable Speed
(w/unit-mounted switch)
94L89 FBK-100-36 Blower, Standard, 36 Pack
94L90 FBK-200-36 Blower Kit - Variable Speed
with Wall Switch 36 Pack
H0543 FBK-250-36 Blower Kit - Variable Speed
with Thermo Snap Switch
36 Pack
(ref. Form # 750,028M & 750,029M)
Variable Speed Wall Switch
Provides variable speed control if optional blower
kit is purchased.
Variable Speed Wall Switch
Cat. No. Model No. Description
045571H VSWS Rocker Switch Kit
Brickaded Wall Liner Kits
Cat. No. Model No. Description
H0912 MBLK-33T
Brick Liner Kit, Top Vent,
LMDVT-3328
H0918 MBLK-33R
Brick Liner Kit, Rear Vent,
LMDVR-3328
H0913 MBLK-35
Brick Liner Kit, Top/Rear,
LMDV-3530
H0914 MBLK-40
Brick Liner Kit, Top/Rear,
LMDV-4035
Brickaded Panel Liner Kit
The brickaded liner kits include ceramic panels as
shown here. The panels have brick-like features in relief.
(ref. Form # 750,160M)
Polished Brass 3-Piece Trim Kit
This kit contains brass trim pieces used to fi nish the
gaps between the wall board and the fi replace, provid-
ing the appliance a brass perimeter highlight. This kit
contains the trim pieces and these instructions
Polished Brass 4-Piece Trim Kit
This kit contains brass trim pieces used to fi nish the
gaps between the wall board and the fi replace, provid-
ing the appliance a brass perimeter highlight. This kit
contains the trim pieces and these instructions
ACCESSORY COMPONENTS
OFF/ON Wall Switch Kit
The OFF/ON wall switch kit may be used to control
the operation of the fi replace burner. Install the
OFF/ON wall switch in a convenient location near
the fi replace.
White Wall Switch Kit
Cat. No. Model No. Description
85L87 FWSK OFF/ON Wall Switch Kit