Filter
Top Products
11
Brick Panel Installation
CAUTION: The brick panels are required for your appli-
ance to function correctly and safely.
Packaging List: Rear brick panel (A), left brick panel (B), right
brick panel (C), retaining brackets (D) - in flue restrictor bag
1. Remove the brick panels from the box and carefully unwrap
them. The panels are fragile, so handle them with care.
Remove the bag containing the brick retaining brackets
(D) and flue restrictors from the firebox.
4. Using the included screws, install the brick retaining brackets
(D) above the left and right brick panels (B and C).
3. Install the left panel (B) bottom first and stand flush against
left wall of firebox. Repeat for right panel (C) against the
right wall of firebox.
2. Install the rear brick panel (A) bottom first and stand it
flush against the rear of the firebox ensuring the pilot
cutout is at the bottom directly above the pilot.
AB C
D
Figure 9
Figure 10
Figure 11
Figure 13
Figure 14
Figure 15
Figure 12
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.