Filter
Top Products
9
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
ACCESSORY COMPONENTS CONTINUED
Bag of Glowing Embers 88L53 FGE
Bag of Glowing Embers
Replacement ember materials are available
for use with these appliances. Order a bag of
Glowing Embers, Model FGE to replace ember
materials as part of the periodic maintenance
of the appliance.
The brick panel liner kits include ceramic panels
of the side walls, the rear and the baffle of the
firebox. The panels have brick-like features
in relief.
ON/OFF Wall Switch Kit 85L87 FWSK
ON/OFF Wall Switch Kit
The ON/OFF wall switch kit may be used to
control the operation of the fireplace burner as
an alternative to the modesty panel mounted
ON-OFF switch. Install the ON/OFF wall switch
in a convenient location near the fireplace.
stiKreniLkcirB
ledoM
.oN
.oNgolataC
.oNledoM
noitpircseD
53VDLE
1693H
53VDLE-RKLB
citsuR
53VDLE
2693H
53VDLE-HKLB
enobgnirreH
53VDLE
3693H
53VDLE-CKLB
dlOdeR
egattoC
53VDLE
8074H
53VDLE-RBKLB
deRnotsoB
04VDLE
4693H
04VDLE-RKLB
citsuR
04VDLE
5693H
04VDLE-HKLB
enobgnirreH
04VDLE
6693H
04VDLE-CKLB
dlOdeR
egattoC
04VDLE
9074H
04VDLE-RBKLB
deRnotsoB
54VDLE
7693H
54VDLE-RKLB
citsuR
54VDLE
8693H
54VDLE-HKLB
enobgnirreH
54VDLE
9693H
54VDLE-CKLB
dlOdeR
egattoC
54VDLE
0174H
54VDLE-RBKLB
deRnotsoB
Twelve Piece Ember Kit
A twelve piece ember kit (model FPCK) has been
developed to provide a means of enhancing
the already impressive log presentation of this
fireplace. This kit contains three (3) ceramic
fiber pine cones and nine (9) ceramic fiber
debris wood bits. All twelve elements will not
be consumed in the flames and may be placed
within the presentation area (without impinging
any of the lofting flames) to add realism and
enhance the rustic look and appeal of the fire.
Pine Cones and
Wood Bits 91L05 FPCK
Digital Wall Thermostat
The wall thermostat kit provides temperature control
for optimum comfort.
Wall Thermostat, Millivolt
Cat. No. Model No. Description
H4635 DWTK Wall Thermostat Kit, White
Horizontal Termination Shroud Kit
The horizontal Termination Shroud Kit may
be used as a decorative cover for the square
termination and to minimize exposure to the
hot surface of the termination.
Horizontal Termination
Shroud Kit H5820 4.5HTSK