Filter
Top Products
7
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
C/A210
SWI210
ZC Fireplace
UL 127
Masonry Fireplace
UBC Chapter 37
Depth Min. 12-1/2” (318mm) 12-1/2” (318mm)
Height Min. 21” (533mm) 19-1/4” (489mm)
Width Min. 36” (914mm) 26” (660mm)
Lintel Max. Depth
u
4-1/2” (114mm) 4-1/2” (114mm)
u
Without use of adjustable offset box or smoke deflector
Table 1 - Fireplace Sizing
Model F (1) G H J(2) M
C/A210
SWI210
18”
450mm
12-1/4”
311mm
19”
483mm
4-1/2”
114mm
42-1/8”
1070mm
C/A210 & SWI210
w/mantel and/or
side shields u
18”
450mm
12-1/4”
311mm
19”
483mm
4-1/2”
114mm
34-1/8”
867mm
* Reduced clearances may be available for A, B, C and D dimensions per
NFPA 211 - latest edition, Standard for Chimneys, Fireplaces, Vents and
Solid Fuel-Burning Appliances (in Canada CSA B365 - latest edition). See
section on “Reduction of Appliance Clearance with Specified Forms of
Protection.”
** Side view of optional mantel deflector shown.
(1)Hearth extension reductions: 2” (51 mm) reduction for 2” (51 mm) raised
hearth. (USA) 16” minimum hearth extension on all stoves and inserts
as measured from the door opening of the unit. (Canada) 18”(450 mm)
minimum hearth extension on all stoves and inserts as measured from the
door opening of the unit. Minimum distance of floor protection to the side
= 8” (200 mm). This is measured from the sides of the door opening in the
USA and from the sides of the insert in Canada.
(2) J = Maximum lintel depth without flue offset or smoke deflector.
Notes:
• Facing material that projects more than 3/4” (19 mm) from the wall
is considered a mantel or side wall.
Model *A *B *C *D E(1)
C/A210
SWI210
USA-24”
CAN-
813mm
USA -18”
CAN-
660mm
18”
450mm
15”
381mm
USA-
8"
CAN-
200mm
C/A210 & SWI210
w/mantel and/or
side shields u
USA-16”
CAN-
813mm
USA -10”
CAN-
660mm
18”
450mm
USA-8”
381mm
USA-
8"
CAN-
200mm
WARNING: BE ABSOLUTELY SURE THE DISTANCE BETWEEN THE
HEATER AND THE SURFACE OF ANY COMBUSTIBLE CONSTRUC-
TION IS NOT LESS THAN SHOWN ON THIS PAGE.
Top View
Figure 7
23”
584mm
25-1/2”
648mm
REQUIRED CLEARANCES
**
Figure 5
Figure 6
6” Ø
Flue Collar
Mantel
Trim
Maximum Mantel Depth = 9” (229mm)
COMBUSTIBLE MANTEL
Top Facing / Trim
Side Facing Material
SIDE WALL
C
Insert
D
B
A
E (USA)
E (Canada)
Hearth Protection
M
F
G
J
H
9”
229mm
Hearth Protection