Lennox Hearth APDL45C Indoor Fireplace User Manual


 
Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2006
P/N 750,215M REV. B 08/2007
Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products.
Consult your local distributor for fireplace code information.
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
1110 West Taft Avenue
Orange, CA 92865
7. Remove the left and right side Style View doors from packaging. Install
them by aligning hinge pins on the doors with the hinge holes on the
doorframe and slide down (see Figure 9 ). Ensure the hinge pins are
fully seated onto the shoulders of the hinge holes.
Note: For MPLDV 30” models, remove single piece facade panel and
mount the four pins into the hinge shoulders.
ON/OFF switch
installed on door-
frame bracket
Door
Hinge
Pin
Insert Hinge Pins Into
Hinge Holes as Shown
Figure 9
Figure 10 - Completed Installation
8. Close Doors (see Figure 10).
ON
OFF
ON
OFF
ON/OFF Switch
Figure 8
ON/OFF Switch Original Location
ON/OFF Switch New Location
Figure 7 - Doorframe Installed