Filter
Top Products
3
Features & Benefits
Cabinet
Low height makes it ideal for low ceiling coolers - larger models are only 15 inches tall, allowing for maximum headroom
and more product storage
Unit designed to be mounted flush against the ceiling or suspended on rods
Heavy gauge grained aluminum cabinet cleans easily and looks attractive
Stainless steel screws prevent rust streaks
Liquid line solenoid wire harness is factory-installed for quick installation
Wire fan guards with PVC coating for durability
All electrical components factory wired to terminal board and identified, making it easy to field wire the unit
Cabinet design features access panels on each end for easy access to electrical and refrigeration components
Fan panel is lightweight and can easily be lowered for easy servicing and installation
Expansion valve mounts inside the cabinet
•
•
•
•
•
•
•
•
•
•
Coils
Sweat connections to reduce potential for leaks
Coils are dehydrated and sealed at the factory
Internally enhanced tubing and fin design for higher efficiency
Electric defrost models incorporate high quality tubular heaters and a standard fixed defrost termination thermostat
Hot gas defrost models come with a shipped-loose adjustable fan delay and defrost termination thermostat
•
•
•
•
•
Drain Pan
Double drain pan eliminates drain pan sweating•
Motors
Motor rail is designed for maximum strength and durability
Motors are life lubricated and thermal overload protected
EC Motors (optional) available factory-installed or as a drop-in replacement through InterLink™ Commercial Refrigeration
Parts in 115/1/60 and 208-230/1/60 voltages
PSC are optional for 115/1/60 and 208-230/1/60 voltages
PSC are required for 50 Hz operation
•
•
•
•
•
Options
Unit Configurations: mounted components, pre-assembled, pre-charged and Beacon II™
- Units available with mounted TXV and mounted TXV / solenoid valve
- Pre-assembled units come with mounted TXV, liquid line solenoid valve and room thermostat
- Pre-charged units come with mounted TXV, liquid line solenoid valve, room thermostat and quick connect fittings
(limited availability)
- Mounted room thermostat option
- Beacon II units come with electronic expansion valves, pressure transducer, temperature sensors and Beacon control board
Most models available with glycol circuiting (see glycol product brochure)
Units available with stainless steel housing and drain pan
Units available with copper fins. Air defrost units also available with polyester coated fins or various coil coatings options
•
•
•
•
All LW Series units are UL-listed for US and Canada and meet NSF standards