Filter
Top Products
- 2 -
Items supplied
Ventilator KH1520
Plinth (2 pieces)
Nut (assembled on screw-thread)
Operating instructions
Check the items supplied for completeness directly
after unpacking. Remove all packaging material.
Technical data
Mains voltage: 220 - 240 V
~
, 50 Hz
Power consumption: 45 W
Protection class: II /
Appliance description
1 Switch for oscillation
2 Screw-thread
3 Plinth
4 Recess for power cable
5 Connection nut
6 Switch 3 (high speed)
7 Switch 2 (medium speed)
8 Switch 1 (slow speed)
9 Switch "OFF"
0 Rotary switch (Timer function)
Before taking into use
1. Unscrew the connection nut 5 from the screw-
thread 2 on the ventilator tower.
2. Combine the two parts of the plinth 3 together
so that they form a circular plate and the pins
protrude into the recesses.
3. Insert the screw-thread 2 of the ventilator tower
through the hole in the plinth 3. Ensure that the
power cable lies in the recess 4 of the plinth 3.
4. Rescrew the connection nut 5 handtight onto
the screw-thread 2, such that the ventilator tower
and the plint 3 are securely connected.
5. Stand the ventilator upright.
6. Connect the plug with a wall power socket.
Operation
1. Position the rotary switch 0 at "ON".
2. Select the desired speed level by using the switches:
1 8= slow speed
2 7= medium speed
3 6= high speed
3. To switch the ventilator off for a short period,
press the button "OFF" 9. To completely switch
the ventilator off, press the button "OFF" 9 and
position the rotary switch 0 at "0".
Oscillation (Turn function)
• Should you wish to activate the oscillation (turn
function), press the button "Oscillation" 1.
• To deactivate the turn function, press the button
"Oscillation" 1 once more.
IB_KH1520_46603_LB6 11.12.2009 11:29 Uhr Seite 2